DIY penis attachment

Penis attachment

The magnitude of male dignity has worried the stronger sex since ancient times. Confirmation of this is the found artificial member, which, according to historians, is at least 28, 000 years old. It was discovered during archaeological excavations in Germany, a country considered to be a pioneer and leader in the porn industry.

Today, it is possible to change the size of the penis by different methods - from the use of special drugs, the use of ointments and creams, performing a pulling massage, to surgical operations. However, genital attachments are becoming popular, which can be either purchased in sex toy stores or made by hand.

Can I make a penis attachment myself?

The Internet is full of requests "how to make an artificial penis with your own hands. "The increased interest is explained simply: the models presented in the stores are of high quality and expensive, and those that have a low price are not of high quality. Wanting to try out a sex toy, a dilemma arises: is it necessary to pay for the product if there is no confidence in its further use?

After all, it may happen that a girl will not approve of the presence of a nozzle or it will cause her discomfort, irritation or pain (the latter is not excluded for men as well). If you choose a more affordable option, there is a risk of irritation due to a possible allergic reaction to the toy or trauma to the genitals due to detached or peeling parts of the nozzle.

It is also possible when you want to try "here and now", but there is no time to wait for an order from the Internet, and there is no opportunity to visit the nearest sex shop. In such situations, the question of how to make a dildo or a penis attachment at home is quite relevant.

If you look at the product, it becomes clear that it is quite difficult to design it, but not impossible. The main thing is to have the desire and a small margin of time, as well as to purchase the necessary materials. The final quality of the resulting object will depend on the latter. The advantage of a homemade member is that its shape and size will be limited solely by the author's imagination.

Choosing the right material

For tips and artificial limbs produced in an industrial setting, use:

  • Cyberskin is a material almost analogous to real human skin. It is soft, delicate, almost indistinguishable from living flesh to the touch. when touching the body, it quickly takes its temperature and maintains it throughout the entire period of time on the organ. Lack of material - it is very susceptible to damage, therefore it requires careful handling, washing in warm soapy water, storage in a special case.
  • Polyvinyl chloride is the most popular material for the production of dildos and sex toys. Its advantages: the ability to quickly take the shape of the human body, strength and combination with lubricants. Washable PVC with mild cleaning agents: soap, shower gel or intimate hygiene, does not require special storage conditions. Application is possible with any frequency and intensity.
  • Silicone is a medical material used for the production of intimate goods in 90% of cases. It is soft, flexible and flexible enough. Able to quickly take the shape of the body, and after "work" to return to its original state. Advantage: hypoallergenic, allowing the use of all toys at any intensity. Store silicone tips in a dark place, becauseit is destroyed under the influence of ultraviolet rays. The disadvantage is that playing with it requires processing lubricants, and exclusively on a water basis.
  • Rubber is a specialized type of material that has enhanced thermoplastic properties and is comfortable to the touch. Suitable for creating products that need to be given and retained the desired shape. The softness of the material allows you to make them comfortable for both partners, and the elasticity allows you to get the desired parameters (length, thickness, ribs, pimples, etc. ). Rubber caps do not rub or cause allergic reactions. For care, use non-aggressive detergents or special cleaners for intimate toys.
  • Plastic is a dense material into which special mixtures are added for greater softness and elasticity. It is used for making special shapes of nozzles.

The choice of material is the most important step in making a dildo with your own hands, becausethe final version of the product and its safety for the health of both partners depend on this. Therefore, saving in this case is extremely undesirable.

Types of materials

Before making a phallus at home, you should clarify which of the specified materials are available to the manufacturer. Some of them are available for free sale in hardware stores, others - when ordering via the Internet.

So, for making a homemade dummy, suitable:

  • alginate molding compound;
  • silicone molding compound;
  • polyurethane filling compound.

The store may offer other options, but before purchasing them, you should find out if the material causes allergic reactions and how safe it is for the body.

Bumpy dick

Stages of work

How to make a dildo at home? You will need:

  • flexible transparent plastic;
  • adhesive tape (scotch tape);
  • selected material;
  • cling film.

A square or rectangle is cut out of a sheet of plastic, depending on the size of the product planned. The length of the sheet is adjustable at will - the more centimeters a man wants to add to himself, the longer it is. The width of the sheet depends on the available parameters of the penis: in an erect state, it should easily pass inward and have free space. To make a homemade member fit in size, follow:

  • measure it with a measuring tape;
  • add the required number of centimeters to the results;
  • cut to the desired width.

Error: wrap a sheet of plastic around the penis and cut it off "by eye" - such a phallus, made by hand, will be either small or too large.

When the dimensions and cutting are finished, the sheet is folded with a tube, the joint of the edges is tightly fixed with tape. A circle is cut out of plastic, which closes one of the holes and is also tightly wrapped with tape. The task is to make the resulting tube completely sealed.

The second step in the "how to make a dildo" process is the fill. To do this, the erect penis is tightly wrapped with cling film so as to exclude contact of the mass with the body. If the task is to make a smooth nozzle, you need to wrap it carefully, excluding all possible irregularities, becausethe smoothness of the inner side of the future nozzle will depend on this.

Next, the molding mass is poured into the prepared tube and the penis is lowered there. The hardening process lasts on average 15 minutes, after which the structure is removed from the penis. Now you can carefully remove the tape and release the product from the plastic frame - the homemade phallus is ready to use.

If a guy wants to give the toy an anatomical shape, this can be done with a knife and abrasive materials. They are also easy to make various projections, ribs, antennae and other "chips" of the nozzles.


Before making a dick with your own hands from scrap materials, you must consider the serious health risks inherent in homemade sex toys:

  • seals, sharp or poorly processed edges, corners, protrusions and other defects in a homemade toy can provoke trauma to the genitals of both partners;
  • incorrectly calculated size threatens to lose the attachment during intimacy; a more serious option - it can get stuck in a woman's body;
  • if the calculations were carried out in a state of incomplete erection or it was lost at the moment of solidification of the mass, there is a risk that it will not be possible to remove the attachment without medical help;
  • violation of tightness when wrapping a penis with a film can cause a mass to enter the urethra, which will provoke an inflammatory process or blockage of the urethra;
  • keeping a penis in a state of full erection for 15 minutes is a difficult task, for which men take medications with phosphodiesterase inhibitors, which have serious side effects on internal organs.

After assessing and weighing all possible risks, they approach the business of independent production of dildos and attachments responsibly and carefully, and all stages are performed accurately and accurately.

What to make an artificial phallus

It is easier to make a dildo at home, i. e. artificial member. Such toys are preferable for ladies, and if the girl wants, she can be left in free possession. Suitable for the production of dumbbells:

Gypsum mix

It is freely available at a home improvement store, drug store, or children's toy store. Having prepared the mass (the rules for working with plaster are described in the instructions enclosed in the package), a member of the required size is molded, it is allowed to dry completely. After it is processed with sandpaper to eliminate all irregularities. Before love games, a condom is put on the phallus.

The use of a plastic gypsum mixture is also possible for the production of attachments: for this, a completely erect and wrapped penis is covered with a gypsum mixture and allowed to harden. However, such a toy will be very hard, and this property causes discomfort, pain, and inconvenience. Its second drawback is fragility.

Silicone mixture

Another option for filling it is in the shape of the previous vibrator. That is, if the toy has already been bought (or the packaging from it accidentally got from friends), the silicone mass can be poured into a plastic mold, previously greased with vegetable oil for free extraction at the end of the work, and after hardening, glue the halves with super glue.

Clay is capable of provoking severe allergies, therefore games with such an artificial member are recommended only with rubber product # 2.


This material is available 90% of the time, everywhere, and it has the following benefits:

  • easily takes the desired shape;
  • has a characteristic aroma;
  • in the absence of allergy to beekeeping products, it is allowed to inject into a woman's body without a condom (it is enough to treat it with lubricant).
Plasticine - material for making an artificial phallus

The wax candle is heated, given the desired length and width dimensions, if desired, additional stimulating protrusions, spikes, ribs, etc.


This product for children's creativity can be used in the same way as wax, but it is worth considering that it is more plastic, and therefore, it can easily lose its shape in the midst of sexual contact. A simple pencil placed inside a sculpted artificial penis, or preliminary freezing of the phallus, can make the toy more stable.

Tools at hand

You can make your own penis cup, but it's not a quick process. If the desire to experiment arose suddenly, and there are no special toys at hand, you can use the tools at hand. What can replace a member?

  • Vegetables and fruits. In almost every refrigerator, there are gifts of nature in the form of a phallic symbol. An ideal and affordable option is cucumbers and bananas, which, when chilled, will bring their zest to intimate games.
  • Mobile phones. We are talking about small models that can be set to vibration mode.
  • Electric shaver. The cutting unit is previously removed from it.

Combs with a long and wide handle, curling irons and other phallic things without sharp corners and protrusions serve as an alternative. The main condition for their use: rinse in water and put a condom on them.

Play in bed with attachments, dildos and lubricants is designed to add variety and spice to a couple's everyday intimate life. However, before replacing the penis with its artificial copy, it is worthwhile to coordinate this issue with your beloved, otherwise the romantic evening may end sadly: with a serious quarrel or a painful breakup.